Stanley AV 10, Руководство по сборке

Страница: 15 / 20

AV
®
5 NOSE ASSEMBLY – 07220-06800
IMPORTANT
Read the safety warnings listed in the AV
®
5 Instruction Manual carefully before putting into service.
IMPORTANT
The air supply hydraulic supply must be turned off or disconnected before fitting or removing the nose
assembly.
Part Number: 07220-06800
Item Part Number Description Qty
1 07220-06601 Nose Casing 1
2 07220-06602 Jaw Housing 1
3 07220-06301 Spring Guide 1
4 73411-05012 Jaws 1 set
5 07500-02005 Spring 1
6 07220-06302 Jaw Spreader 1
FITTING INSTRUCTIONS
Item numbers in
bold
refer to nose assembly components in the tables and diagram above.
• The air supply and hydraulic supply must be disconnected.
• Lightly coat Jaws (
4
) with Moly lithium grease.
• Assemble the Jaw Spreader (
6
), Spring Guide (
3
) and Spring (
5
) and stand on end on a flat even surface.
• Balance the three Jaws (
4
) on the upper Spring Spreader (
6
).
• Carefully lower Jaw Housing (
2
) over the assembled components.
• Holding tool pointing down, screw the assembled jaw housing onto the tool head piston and tighten with spanner.
• Screw the nose tip into Nose Casing (
1
) and tighten with spanner.
• Place the Adapter Ring over the rear of the Nose Casing (
1
), ensuring that the lugs on the body enter the slots in the
Adapter Ring.
• Place Nose Casing (1) and Adapter Ring over the Jaw Housing (
2
) and onto the tool.
• Place the Retaining Nut from the tool over the Nose Casing (
1
), attach to the tool and tighten with a spanner.
SERVICING INSTRUCTIONS
• Nose assemblies should be serviced at weekly intervals. You should hold some stock of all internal components of the
nose assembly and nose tips as they will need regular replacement.
• Remove the nose assembly using the reverse procedure to the ‘Fitting instructions’.
• Any worn or damaged parts should be replaced.
• Clean and check wear on jaws.
• Check that the spring and spring guides are not distorted.
• Clean and inspect components, renewing worn or damaged items.
• Assemble according to fitting instructions.
15
ORIGINAL INSTRUC TION ENGLISH