Stanley AV 10, Руководство по сборке

Страница: 7 / 20

SERVICING INSTRUCTIONS
• Nose Equipment need to be serviced at weekly intervals or every 3,000 cycles. Hold some stock of all internal
components of Nose Equipment and Nosepieces, they need regular replacement.
• The air supply must be disconnected.
• Remove Nose Casing (
1
), including Nosepiece, and O-Ring (
2
) from the tool.
• Pull back Jaw Guide Lock (
9
) against Jaw Guide Lock Spring (
10
) and then remove Jaw Guide (
3
).
• Remove Jaws (
4
) from Jaw Guide (
3
).
• Remove Jaw Spreader (
5
), Buffer (
6
), and Jaw Spring (
7
), from Pulling Head (
8
).
• Rotate Lock Nut (
11
) anti-clockwise and remove Pulling Head (
8
), Jaw Guide Lock (
9
), Jaw Guide Lock Spring (
10
) from
the tool piston using spanners.
• Inspect all components. Any worn or damaged parts must be replaced by a new part.
• Particularly check wear Jaws (
4
).
• Clean all parts and apply moly lithium Grease (07992-00020) to Jaws (
4
) and taper bore of Jaw Guide (
3
).
• Assemble according to fitting instructions above.
7
ORIGINAL INSTRUC TION ENGLISH