5
2. SPECIFICATIONS
2.1 INTENT OF USE
The 71502 Module is principally a piston and cylinder assembly. When coupled hydraulically to a compatible hydraulic
power source and the relevant nose assembly is attached, it is then used to install blind rivets up to 4.8mm (3/16”) in
diameter, in Industrial Environments.
The placing module may only be used in accordance with the operating instructions for placing Stanley Engineered
Fastening structural rivets.
DO NOT
use under wet conditions or in the presence of fl ammable liquids or gases.
The safety instructions must be followed at all times.
2.2 TOOL SPECIFICATION
SPECIFICATION
METRIC
IMPERIAL
Force: Pull at stated pull pressure
7.0 kN
1574 lbf
Pressure: Maximum
217 bar
3200 PSI
Stroke: Piston Stroke
16.0 mm
0.625 in
Piston Bore Diameter: Minimum
3.90 mm
0.154 in
Weight: Without nose equipment
0.49 kg
1.07 lbs
2.3 TOOL DIMENSIONS
All dimensions are shown in millimetres.
O R I G I N A L I N S T R U C T I O N
E N G L I S H
