Standard Horizon MATRIX GX1280S, Руководство пользователя

Страница: 21 / 72

GX1280S Page 21
NOTE
Triple watch (T/W) means the radio is watching CH70 for DSC Calls.
Dual watch (D/W) means the radio is not watching CH70 for DSC Calls.
5.10 NAVIGATION INDICATION
The transceiver has the ability to display the time, SOG and COG date, as
well as the vessel’s position (LAT/LON), if connected to a GPS receiver.
1. Press and hold the [ H/L
] key to display position
information. If the GPS receiver receives no sig-
nal, the display will be as shown in the illustration
on the right.
2. To hide the position information, press the [ H/L
]
key.
NOTE
The TIME OFFSET should be set to local time in the DSC/RADIO setup
mode when the radio is connected to the GPS navigation receiver. To
adjust TIME OFFSET to your local time, refer to section 7.11 TIME OFF-
SET.
5.11 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 voice scrambler (VS)
can be installed in the transceiver. Contact your Dealer to have a CVS2500
installed. Refer to the section 7.8 DSC/RADIO SET UP mode to program
the voice scrambler.
1. Turn on the transceiver.
2. Select a channel that was programmed for scram-
bler mode. (Example: the voice scrambler code is
set 3.)
Ÿ
If a channel is not set for the voice scrambler,
the display will be as shown in the illustration at
the right.
Ÿ
If a voice scrambler is canceled temporarily in
the “SETUP” menu, the display will be as shown
in the illustration at the right.
3. Monitor the channel before transmitting.
4. Transmit the voice message. The signal sent will be scrambled.