Standard Horizon MATRIX GX1280S, Руководство пользователя

Страница: 20 / 72

GX1280S Page 20
5.8 MEMORY SCANNING (M-SCAN)
NOTE
• During scanning, the dot matrix area of the LCD will show M-SCAN or
P-SCAN depending on the scan mode selected.
• If GPS position is displayed this icon will be hidden.
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
CHANNEL selector knob. Press the [ MEM
] key,
“ MEM ” will appear on the LCD which indicates the
channel has been programmed into the transceiv-
ers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, press and hold
the [ MEM
] key, “
MEM ” will disappear in the LCD.
5. To start scanning, press the [ SCAN
] key. Scan-
ning will proceed from the lowest to the highest
programmed channel number and will stop on a
channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the [
SCAN
], [
16/9
], [
WX
], or
PTT key.
5.9 PRIORITY SCANNING (P-SCAN)
1. Any channel can be set as the priority channel, other than weather chan-
nels and channel 70. To set the priority channel,
select the desired channel. Press and hold down
the [
MEM
] key until “
P-CH ” is shown on the dis-
play.
2. To select priority scanning, hold down the [ SCAN
] key until “
P-SCAN ”
appears on the LCD during memory scanning. Scanning will proceed
between the memorized channels and the priority channel. The priority
channel will be scanned after each programmed channel.
ø
: When DSC Scanning method is enabled. Default is DSC scan is ON.
3. The scanning will be performed while receiving
the MEM CH (memorized channel).
4. To stop scanning, press the [ SCAN
], [
16/9
], [
WX
],
or PTT key.
MEM CH. CH. 16
ø
CH. 70 MEM CH. CH. 16
ø
CH. 70