background image

Page 3

2. SAFETY PRECAUTIONS

Be sure to read the safety precautions, and use this product safely.

Yaesu is not liable for any failures or problems caused by the use or misuse of this product by the pur-

chaser or any third party. Also, Yaesu is not liable for damages caused through the use of this product 

by the purchaser or any third party, except in cases where ordered to pay damages under the laws.

Types and meanings of the marks

 

DANGER

This mark indicates an imminently hazardous situation, which, if not avoided, could result in 

death or serious injury.

 

WARNING

This mark indicates a potentially hazardous situation, which, if not avoided, could result in 

death or serious injury.

 

CAUTION

This mark indicates a potentially hazardous situation, which, if not avoided, may result in 

minor or moderate injury or only property damage.

Types and meanings of symbols

These symbols signify prohibited actions, which must not be done to use this product safely.

For example:   indicates that the product should not be disassembled.
These symbols signify required actions, which must be done to use this product safely. For example:   indicates 

that the power plug should be disconnected.

 DANGER

Do not operate the device when flammable gas is 

generated.

Doing so may result in fire and explosion.

Do not transmit with this device in a crowded place 

for the safety of persons using a medical device 

such as a cardiac pacemaker.

The radio wave emitted from this product can cause the 

medical device to malfunction and result in an accident.

Do not touch any liquid leaking from the liquid dis-

play with your bare hands.

There is a risk of chemical burns occurring when the 

liquid comes into contact with the skin or gets into the 

eyes. In this case, seek medical treatment immediately.

Do not touch any material leaking from the battery 

pack with bare hands.

The chemical that has stuck to your skin or entered your 

eye can cause chemical burns. In such a case, consult 

the doctor immediately.

Do not solder or short-circuit the terminals of the 

battery pack.

A fire, leak, overheating, explosion, or ignition may result.

Do not carry the battery pack together with a necklace, 

hairpin, or small metal objects. A short circuit can result.

 WARNING

Do not power this transceiver with a voltage other 

than the specified power supply voltage.

A fire, electric shock, or damage may result.

Do not make very long transmissions.

The main body of the transceiver may overheat, result-

ing component failure or operator burns.

Do not disassemble or make any alteration to this product.

An injury, electric shock, or failure may result.

Never touch the antenna during transmission.

This may result in injury, electric shock and equipment failure.

Do not handle the battery pack or charger with wet 

hands. Do not insert or remove the power plug with 

wet hands.

An injury, leak, fire, or failure may result.

If smoke or a strange odor is emitted from the main 

body, battery pack, or battery charger, immediately 

turn the transceiver off; remove the battery pack.

A fire, chemical leak, overheating, component damage, 

ignition, or failure may result. Please contact the dealer 

from which you purchased this product.

 CAUTION

Do not place the transceiver on an unsteady or slop-

ing surface, or in a location with extreme vibration.

The transceiver may fall or drop, resulting in fire, injury 

and equipment damage.

Stay as far away from the antenna as possible during 

transmission.

Long-term exposure to electromagnetic radiation may 

have a negative effect on the human body.

Do not dangle or throw the transceiver by holding 

its antenna.

This may injure others and may also result in damage 

and failure of the transceiver.

Do not wipe the case using thinner and benzene etc.

Use only a soft, dry cloth to wipe stains from the case.

Keep this product out of the reach of children.

Injury to the child, or damage to the transceiver may result.

Do not use any products other than the specified 

options and accessories.

Failure or miss operation may result.

If the transceiver will not be used for an extended 

period, turn it OFF and remove the battery pack for 

safety.
Do not throw the transceiver, or subject it to strong 

impact forces.

Physical abuse may result in component damage and 

equipment failure.

Keep magnetic cards and videotapes away from the 

transceiver.

The data recorded on cash cards or videotapes may be 

erased.

Do not use the transceiver in a crowded place.

The antenna may strike others and result in an injury.

Install the hand strap and belt clip securely.

Improper installation may cause the transceiver to fall or 

drop, resulting in an injury or damage.

Before discarding a depleted battery pack, affix tape 

or insulating covering to its terminals.

Содержание HX40





















































Отзывы: