Standard Horizon HX40 страница 19 Скачать руководство пользователя

Страница: 19 / 52

Page 17

8.4.1 TRANSMIT POWER

The TX output power of the

HX40

is set to high level (6 W (5 W)

) in factory

default, and the “

” indicator is displayed on the top part of the screen.

To change the TX output power:

1. Press the [◄] or [►] key to display the soft keys.

2. Press the [◄] or [►] key repeatedly, until

[

], [

], or [

] is selected above a soft

key at the bottom of the LCD.

3. Press the [

ENT/MENU

] key repeatedly to

switch between HI (6 W (5 W)

), MD (2.5 W),

or LO (1 W) output power.

: 5W TX required in some countries.

NOTE

: Soft Key displays the next Power Level to be selected when pressed. The

actual TX Power Level is always shown in the icon on the top line of the display.

8.4.2 TRANSMIT TIME - OUT TIMER (TOT)

While the

PTT

switch is held down, transmission time is limited to 5 minutes.

This prevents prolonged (unintentional) transmissions. About 10 seconds

before automatic transmitter shutdown, a warning beep will sound from the

speaker. The transceiver automatically switches to receive mode, even if

the

PTT

switch continues to be held down. The

PTT

switch must first be re

leased, then wait 10 seconds before transmission may be started again. This

Time-Out-Timer (TOT) prevents a continuous transmission that would result

from an accidentally stuck

PTT

switch.

8.5 CHANNEL GROUP

Set the Channel Group according to the region.

1. Press and hold the [

ENT/MENU

] key.

2. Press the [▲] or [▼] key to select “

CHANNEL SETUP

”.

3. Press the [◄] or [►] key to select the [

ENTER

] soft key, then press the

[

ENT/MENU

] key.

4. Press the [▲] or [▼] key to select “

CHANNEL GROUP

”.

5. Press the [

ENT/MENU

] key.

6. Press the [▲] or [▼] key to select the de

sired channel group “USA”, “INTERNA-

TIONAL”, or “CANADA”

: In the European version, when setting the region, the selected Europe-

an Channel Group will be displayed instead of “CANADA”. For details,

refer to the Note on the Setting the Region on the separate yellow in-

sert sheet.

7. Press the [

ENT/MENU

] soft key to store the selected setting.

8. Press the [

CLR

] key to return to radio operation.

Содержание HX40





















































Результаты поиска

Содержание HX40

Отзывы:

Похожие инструкции для HX40

Бренды по названию

Популярные бренды

Standard Horizon HX40, Руководство владельца и руководство пользователя

Результаты поиска

Содержание HX40

Отзывы:

Похожие инструкции для HX40

Бренды по названию

Популярные бренды