Standard Horizon HX40 страница 12 Скачать руководство пользователя

Страница: 12 / 52

Page 10

Battery Maintenance

For safe and proper battery use, please observe the following:



Use only STANDARD HORIZON approved batteries.



Do not reverse the charge polarity. Use only the proper charger. If this is

tampered with or another charger is used, permanent damage may re-

sult.



Use only a STANDARD HORIZON approved charger. The use of any

other charger may cause permanent damage to the battery.

Battery Recycling

DO NOT PLACE USED BATTERIES IN THE REGULAR TRASH!

LI-ION BATTERIES MUST BE COLLECTED, RECYCLED

OR DISPOSED OF IN AN ENVIRONMENTALLY SOUND

MANNER.

Incinerating Li-ion batteries, placing them in the land fill, or mixing them with

the municipal solid waste collection, is PROHIBITED BY LAW in most areas.
Return batteries to an approved Li-ion battery recycler. This may be available

you purchased the battery.

Contact your local waste management officials for other information regarding

the environmentally sound collection, recycling and disposal of Li-ion batteries.

6.1.2 BATTERY CHARGING

Using the supplied battery charger and cradle, it take about 3 hours* to

charge the built-in battery fully.

*: Depending on the battery status, the charging time might be increased.
1. Turn the transceiver

OFF

2. Referring to the figure at the right,

connect the battery charger plugs.

3. When the

HX40

is being charged, the

HX40

’s LCD display will show the bat-

tery charging icon.

4. When charging is completed, the bat-

tery charging icon will disappear.

CAUTION

The

SAD-23/SAD-11

and

SBH-27

are NOT designed to be waterproof.

Do not attempt to charge in water hazardous locations.

Содержание HX40





















































Результаты поиска

Содержание HX40

Отзывы:

Похожие инструкции для HX40

Бренды по названию

Популярные бренды

Standard Horizon HX40, Руководство владельца и руководство пользователя

Результаты поиска

Содержание HX40

Отзывы:

Похожие инструкции для HX40

Бренды по названию

Популярные бренды