Standard Horizon HX290E, Руководство пользователя

Страница: 26 / 40

HX290E
Page 26
7. ATIS SETUP
The
HX290E
supports the ATIS (Automatic Transmitter Identification System)
used in Inland waterways in Europe. When enabled ATIS mode transmits a
unique ATIS code each time the
PTT
(
) switch is released at the end of a
transmission.
Users should check with their local marine regulatory authority in their country
for assistance in obtaining an ATIS code.
7.1 ATIS CODE PROGRAMMING
1. Turn the transceiver off by rotating the
VOL
knob fully counter-clockwise.
2. Hold down the key, and then turn on the transceiver
while still holding down the key.
3. “
SEt SEt
SEt SEt
SEt
” will appear on the display, indicating the Menu
(“Set”) Mode has been activated.
4. Press the key, repeatedly if necessary to select the
Menu item “
Atc Atc
Atc Atc Atc
”.
5. Press the or key to select the first number of your
ATIS, then press the key to step to the next number.
6. Repeat step 5 to set your ATIS (ten digits).
7. When finished programming the number, press and hold
the key.
8. Set your ATIS number again.
9. Press and hold the
key to store the ATIS number in
memory.
10. After completing your programming, turn the
transceiver off and on by rotating the
VOL
knob.
ATIS Digits
ATIS Number (First Entry)
ATIS Number (Second Entry)
ATIS Digits
ATIS Number