Standard Horizon HX280S, Руководство пользователя

Страница: 30 / 44

HX280S Page 30
8. MAINTENANCE
8.1 GENERAL
The inherent quality of the solid-state components in STANDARD HORIZON
radios will provide many years of continuous use. Take the following precau-
tions to prevent damage to the radio.
y To prevent corrosion of electrical contacts and keep the water resistance,
keep the microphone connected or the jack covered at all times.
y Never key the transmitter unless an antenna or suitable dummy load is
connected to the antenna receptacle.
y Ensure that the input voltage does not exceed the value specified in your
Owner’s Manual.
y Use only STANDARD HORIZON-approved accessories and replacement
parts.
8.2 REPLACEMENT PARTS
Occasionally an owner needs a replacement part. These can be ordered from
our Parts Department by writing or calling (in USA or Canada), or Standard
Horizon/Vertex Standard authorized dealers (outside USA or Canada).
Marine Division of Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Telephone (714) 827-7600
Commonly requested parts, and their part numbers are listed below.
y VOL Knob: RA1078700
y CD-46 Charger Cradle: CB4777001
y CAT460 Antenna: Q3000176
y CLIP-920 Belt Clip: AAE51X001