manualshive.com logo in svg

Standard Horizon Explorer GX1600E, Руководство пользователя

Поделиться
Скачать
Standard Horizon Explorer GX1600E Скачать руководство пользователя страница 61

Page 61

GX1600E

11. Press the 

 soft key to return to radio operation.

9.9.3  Receiving a DSC Position Report Call

When another vessel transmits their vessels location to the 

GX1600E

 the

following will happen:

1. A ringing sound will be produced when the call is received and NMEA

sentences DSC, DSE are outputted so the position
can be shown on a chart plotter or a computer.

2. Press the any key to stop ringing.
3. Press the 

/

 key to see position informa-

tion of the station.

4. To exit to radio mode, press the 

 soft key.

9.9.4  Navigating to a Position Report

The 

GX1600E

 has a feature that allows navigation to a received Position

Report call by using the Compass display. Navigating to the location of a Posi-
tion Report call may be enabled by the procedure below.

1. After the Position Report call has been

received: press the 

 soft key.

2. To start navigating using the compass display,

press and hold the 

 soft key until the

Compass Page is shown. The display indicates the
distance and direction of the received vessel, and
the compass indicates the received vessel by a dot
(

) icon.

9.9.5  Stop Navigating to Position Report

To stop navigating to a waypoint, press the one of the
Soft keys, then press the 

 soft key. The radio is

switched to Normal Mode.

Содержание Explorer GX1600E













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды