manualshive.com logo in svg

Standard Horizon Explorer GX1600E, Руководство пользователя

Поделиться
Скачать
Standard Horizon Explorer GX1600E Скачать руководство пользователя страница 22

GX1600E

Page 22

7 CONTROLS AND INDICATORS

NOTE

This section defines each control of the transceiver. For operating in-
structions refer to section “

8 BASIC OPERATION

”.

7.1

FRONT PANEL

/

 Key

The 

/

 keys are used to select channels and to choose menu

items (such as the DSC menu, Radio Setup and DSC Setup menu). 

 /

 keys on the microphone can also be used to select channels and

menu items.

S

ECONDARY

 

USE

While holding down the 

 soft key and pressing 

/

 key, you

can confirm memory channels that have been programmed for scanning.

 Key

Press the 

 key briefly to recall channel 16 from any channel location.

Press and hold the 

 key to recall channel 9. Pressing the 

 key

again reverts to the previous selected working channel.

 Key

Turns the transceiver on and off. To turn the transceiver on, press and hold
this key until the LCD turns on. To turn it off, press and hold this key until
the LCD turns off. When the power is turned on, the transceiver is set to
the last-selected channel.

Содержание Explorer GX1600E













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды