manualshive.com logo in svg

Standard Horizon Explorer GX1600E, Руководство пользователя

Поделиться
Скачать
Standard Horizon Explorer GX1600E Скачать руководство пользователя страница 38

GX1600E

Page 38

9.3.1.3 Pausing a DSC Distress Call
After a DSC Distress call is transmitted, the DSC distress call is repeated
every 4 minutes until the call is canceled by the user or until the radio is turned
on and off again. The 

GX1600E

 has provision to suspend (Pause) the retrans-

mitting of the distress call by the procedure below.

1. After the distress call is transmitted, the radio will

show the top display to the right.
Looking at this display you will notice TX in: 02:25,
this is the time when the radio will re-transmit the
DSC distress call.

2. To suspend re-transmitting the DSC call, press the

 soft key.

3. To resume counting down to transmit the DSC

Distress call, press the 

 soft key.

9.3.1.4 Cancel a DSC Distress Call
If a DSC Distress call was sent by error the 

GX1600E

 allows you to send a

message to other vessels to cancel the Distress Call that was made.

Press the 

 soft key, then

press 

 soft key.

9.3.2  Receiving a DSC Distress Call

1. When a DSC Distress call is received, an emergency alarm sounds.
2. Press any key to stop the alarm.
3. The display shows the position of the vessel in

distress. To show additional information of the ves-
sel in distress, press the 

 key (refer to the sec-

ond display).
On the display you will notice 3 soft key selections.
These selections are described below:
a. 

: Accept to auto switching to Channel 16.

Note

: If a key is not pressed for 30 seconds or longer

the radio will automatically select Channel 16.
b. 

: Temporarily suspend switching to channel 16.

c. 

: Exit to the working channel.

4. Press the 

 soft key to enter the “

Waypoint Input

Waypoint Input

Waypoint Input

Waypoint Input

Waypoint Input

” menu, then enter

the desired waypoint name (up to 11 characters), described previously
(select the letter/number by pressing the 

/

 key and move the

Содержание Explorer GX1600E













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды