Standard Horizon Eclipse DSC+ GX1100S, Руководство пользователя

Страница: 50 / 76

GX1100S Page 50
8. Press the [ T
(
DOWN
)] key to show the position
from the polled vessel transferred on the display.
9. If the GX1100S does not receive a reply, the dis-
play will be as shown in the illustration on the right.
To send again, press the [
ENT
] key.
NOTE
If the GX1100S does not receive position data from the polled vessel, the
LCD will show “NO POSITION DATA.”
Manual Request
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
1. Press the [ CALL
(
MENU
)] key. The “
DSC MENU DSC MENU DSC MENU DSC MENU DSC MENU
”
will appear in the display.
2. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to select
“
POS REQUEST POS REQUEST
POS REQUEST POS REQUEST POS REQUEST
”.
3. Press [ ENT
] key to show the Position request di-
rectory. This directory uses the INDIVIDUAL Di-
rectory information.
4. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to select
the “
MANUAL MANUAL MANUAL MANUAL MANUAL
”, then press the [ ENT
] key.
5. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to scroll
through numbers, 0-9. To enter the desired num-
ber and move one space to the right press the
[
ENT
] key. Repeat this procedure until all nine
space of the MMSI number which you want to con-
tact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the microphone’s [ H/L
] key until
the wrong nunber is selected, then press the
[
S
(
UP
)] / [
T
(
DOWN
)] keys to correct the entry.
7. When finished entering the MMSI number, press
and hold the [ ENT
] key.
8. Press the [ ENT
] key to transmit the position re-
quest DSC call.
9. When the GX1100S receives the position from the
polled vessel, the GX1100S will produce a ringing