Standard Horizon Eclipse DSC+ GX1100S, Руководство пользователя

Страница: 48 / 76

GX1100S Page 48
11.8 POSITION REQUEST
Advancements in DSC have made it possible to poll the location of another
vessel and show the position of that vessel on the display of the
GX1100S .
Standard Horizon has taken this feature one step further, if any Standard Hori-
zon GPS is connected to the
GX1100S , the polled position of the vessel is
shown on the display of the GPS chart plotter making it easy to navigate to the
location of the polled vessel. This is a great feature for anyone wanting to know
the position of another vessel. For example your friend that is catching fish, or
finding the location of a person you are cruising with.
NOTE
The other vessel must have an operating GPS receiver connected to its
DSC transceiver and must not have its transceiver set to deny position
requests. (Refer the section “
11.5.1 Setting up the Individual / Posi-
tion Call Directory ” to enter information into the individual directory).
11.8.1 Setting up Position Reply
The GX1100S can be set up to automatically or manually send your position to
another vessel. This selection is important if you are concerned about some-
one polling the position of your vessel that you may not want to. In the manual
mode you will see the MMSI or persons name shown on the display allowing
you to choose to send your position to the requesting vessel.
1. Press and hold down the [ CALL
(
MENU
)]
key until “
SETUP MENU SETUP MENU
SETUP MENU SETUP MENU
SETUP MENU
” appear.
2. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect “
DSC SETUP DSC SETUP
DSC SETUP DSC SETUP DSC SETUP
” menu.
3. Press the [ ENT
] key, then select “
POS RE- POS RE- POS RE- POS RE- POS RE-
PLY PLY
PLY PLY PLY
” with the [ S
(
UP
)] / [
T
(
DOWN
)] keys.
4. Press the [ ENT
] key.
5. Press the [ S
(
UP
)] / [
T
(
DOWN
)] keys to se-
lect “
AUTO AUTO AUTO AUTO AUTO
” or “
MANUAL MANUAL MANUAL MANUAL MANUAL
”. In “
AUTO AUTO AUTO AUTO AUTO
” mode,
after a DSC POS Request is received, the radio
will automatically transmit your vessels position.
In “
MANUAL MANUAL
MANUAL MANUAL MANUAL
” mode, the display of the GX1100S
will show who is requesting the position.
6. Press the [ ENT
] key to store the selected setting.
7. To exit this menu and return to radio operation mode press the [ 16/9
] key.