manualshive.com logo in svg

Standard Horizon CPV550, Руководство пользователя

Поделиться
Скачать
Standard Horizon CPV550 Скачать руководство пользователя страница 74

Page 74

CPV550

14. ADVANCED SETTINGS

The Advanced Setup menu allows customization of many GPS functions, Alarms and
NMEA interfacing.
1. From the chart page, press the 

[MENU]

 key twice. Move the ShuttlePoint knob to

highlight 

ADVANCED SETUP

 and press 

[ENT]

or move the ShuttlePoint knob to the

right.

Figure 14 -  Advanced Settings Menu

While in this menu you will see many selections which are described in the next sections.

14.0 INPUT/OUTPUT (NMEA)

The INPUT/OUTPUT CONNECTION allows the CPV550 NMEA inputs and output Ports
to be changed.

The NMEA input Ports can be selected to allow a

- NMEA device - select NMEA 0183 4800-N81-N
- FF520 connected, selected FF520
- Radar antenna connected, select Radar
- AIS reciever is connected, select AIS 38400
- the port may also be disabled.

The NMEA Output Ports can be selected to enable or disable the following NMEA
Sentences:
GLL, VTG, BWC, WCV, APA, APB, HDG, BOD, XTE, RMA, GGA, HSC, DBT, DPT, MTW
and VHW.

Figure 14.0 -  IN/OUT CONNECTIONS Menu

Содержание CPV550





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды