Page 57
CPV550
9. Move the ShuttlePoint knob up/down to change the characters and left/right to select
a different character in the Routes Name.
10. When finished press
[ENT]
to save.
11. Press [
CLR]
to show the Chart page is shown.
10.3 INSERTING A WAYPOINT INTO A ROUTE
Place the cursor on the navigation line between two points and press
[RTE]
. Move the
ShuttlePoint knob to the desired location of the Waypoint and press
[ENT]
.
10.4 GOTO A ROUTE
10.4.0 By select Route
1. Move the ShuttlePoint knob to an open position (no buoy, warning etc. under the cursor)
on the Chart page.
2. Press
[GOTO]
to show the GOTO popup window.
3. Move the ShuttlePoint knob to highlight
ROUTE
and press
[ENT]
.
4. The SELECT ROUTE popup window will be shown.
5. Move the ShuttlePoint knob to the highlight the desired Route and press
[ENT]
.
6. On the Chart page a circle with a Flag is shown on the first leg of the Route and a navigation
line is shown, indicating the GPS Chart Plotter is navigating to the first Waypoint in the
Route.
Figure 10.4.0 - Select a Route
10.4.1 By Cursor key
1. On the Chart page move the ShuttlePoint knob until the cursor reaches the starting point
of the Route.
2. Press
[GOTO]
to start following the Route.
3. Press
[CLR]
twice to revert to Home mode.
10.5 OTHER SETTINGS IN ROUTE MENU
You will notice the
ROUTE
menu has other selections.
SELECT
Choose an available Route to create or choose a stored Route to show and follow on the Chart page.
DELETE
Deletes the Route when shown in the above SELECT menu.
REVERSE
Reverses the Route, when chosen Starting point is at the end of the Route.
COLOR
Allows changing the color of the navigation lines between in leg in the Route.
REPORT
The Route Report menu is useful to show details of the Waypoints contained within the Route. This
menu also allows you to enter in your average speed and fuel consumption and calculate the
approximate fuel used when following the Route.
SEND
Sends the stored points to a external device (PC) capable of listening to NMEA RTE sentence.
RECEIVE
Receive the points from an external device (PC) capable of sending NMEA RTE sentence.