Stamina PILATES 4500 JP, Руководство пользователя

Страница: 7 / 15

STEP 4
Remove the paper covering from the foam tape inside the
FRONT COVER(3)
and
REAR COVER(4).
Place the
FRONT COVER(3)
over the
FRONT FRAME(1).
Place the
REAR COVER(4)
over the
REAR FRAME(2).
Press the covers securely in place.
NOTE:
7
ASSEMBLY INSTRUCTIONS
SUPPORT
BRACKET
The securing
SCREWS(M6 x 35mm)(35)
for the
PULLEY ASSEMBLY(19)
on each side may
need to be loosened to allow the
REAR COVER(4)
to fit securely over the frame. Refer to the
inset illustration. When retightening the screws for the
PULLEY ASSEMBLY(19)
do not over
tighten. The
PULLEY ASSEMBLY(19)
should move freely.
STEP 5
Insert the
FOOT REST(5)
into the mounting holes located on the
FRONT FRAME(1).
The
FOOT
REST(5)
should pass through the
FRONT COVER(3)
and the
FRONT FRAME(1).
STEP 6
Insert the
FOAM PAD ASSEMBLIES(14)
into the holes located on the
CUSHION ASSEMBLY(7).
STEP 7
The
HEAD REST(12)
on the
CUSHION ASSEMBLY(7)
can be positioned at an incline by simply pivoting
the
SUPPORT BRACKET
underneath the
HEAD REST(12).