STEP 1:
There is a
"R"
decal on one end of the
FRONT STABILIZER(2)
. Attach the
FRONT STABILIZER(2)
onto the
MAIN FRAME(1)
with the
"R"
decal end at right side and secure with
SOCKET HEAD BOLTS
(M8x1.25x70mm)(81)
and
LOCK WASHERS(M8)(89).
STEP 2:
Insert the
STOPPER TUBE(48)
through the
MAIN FRAME(1)
and secure with
BUTTON HEAD
BOLT (M8x1.25x15mm)(94).
Slide the
FOOT PLATES(116)
on both sides of the
STOPPER TUBE(48).
Press the
DOME PLUGS(25mm)(78)
into both ends of the
STOPPER TUBE(48).
NOTE:
STEP 3:
Insert the
PEDAL SHAFT(44)
through the
MAIN FRAME(1).
Place the
RIGHT FOOT PEDAL
ASSEMBLY(46R)
onto the right end of the
PEDAL SHAFT(44)
and place the
LEFT FOOT PEDAL
ASSEMBLY(46L)
onto the left end. Secure the
FOOT PEDALS
with
BUTTON HEAD BOLTS
(M8x1.25x15mm)(94)
and
LARGE WASHERS(M8)(109)
at both ends of the
PEDAL SHAFT(44).
NOTE:
R
L
R
6
You need to use two Allen Wrenches to tighten the
BUTTON HEAD BOLTS(M8x1.25x15mm)(94)
at both ends of the
PEDAL SHAFT(44)
at the same time.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520
or e-mail us at:
ASSEMBLY INSTRUCTIONS
The
PEDAL STRAPS(47)
are pre-assembled to the
FOOT PEDALS(46).
The pedal and strap
assembly for the left side has a
"L"
decal. The pedal and strap assembly for the right side has a
"R"
decal.
Содержание Conversion II9003
Страница 18: ...18 PRODUCT PARTS DRAWING FRONT BACK ...
