Stamina Ab/Hyper Bench, Руководство пользователя

Страница: 7 / 15

ASSEMBLY INSTRUCTIONS
STEP 3
Attach the two
CUSHION RAILS(2)
onto the
CUSHION SUPPORT FRAME(4)
with
HEX BOLT
(M10 x 140mm)(21), WASHERS(M10)(24),
and
NYLOCK NUT(M10)(23).
NOTE:
Tighten until snug, the
CUSHION RAILS(2)
must be allowed to pivot.
7
STEP 4
Slide the
SEAT ADJUSTMENT(9)
around
CUSHION SUPPORT FRAME(4)
and between the
CUSHION RAILS(2).
To attach the open end of the
SEAT ADJUSTMENT(9)
to the
CUSHION
RAILS(2),
insert the
HEX BOLT(M10 x 140mm)(21)
through the
WASHERS(M10)(24), CUSHION
RAILS(2), SPACERS(25), SEAT ADJUSTMENT(9), LONG SPACER(26),
and tighten together with
NYLOCK NUT(M10)(23).
Refer to the Illustration.
NOTE:
Tighten until snug, the
CUSHION RAILS(2)
must be allowed to pivot.
STEP 5
The
SEAT CUSHION (1)
can be adjusted to three different incline positions. To position the
SEAT CUSHION(1)
to desired elevation, select one of the holes in the
SEAT ADJUSTMENT(9)
and attach the
SEAT
ADJUSTMENT(9)
to one of the holes in the
CUSHION SUPPORT FRAME(4)
with the
LOCKING PIN(14).
STEP 6
Attach the
SEAT CUSHION(1)
onto the
CUSHION RAILS(2)
with
ROUND HEAD BOLTS
(M6 x 34mm)(22).