ASSEMBLY INSTRUCTIONS
11
STEP 10
There is a
“R”
decal on the
RIGHT PEDAL CAP(78),
and a
“L”
decal on the
LEFT PEDAL CAP(79).
Attach the
RIGHT PEDAL CAP(78)
to the
PEDAL ARM(5)
on the right side with the
LOCKING KNOBS(77),
WASHERS(M10)(63),
and
CARRIAGE BOLTS(M10x1.5x50mm)(45).
Repeat on the left side.
NOTE:
You can loosen the
LOCKING KNOBS(77)
to adjust the
PEDAL CAPS(78, 79)
to the front or
back. Securely tighten the
LOCKING KNOBS(77)
after adjustment. Always set the
PEDAL CAPS
(78, 79)
at the same position on both sides.
STEP 11
Install two AAA batteries into the
METER(25),
the batteries are not included. See page 21 for detailed battery
installation instructions. Plug the
CONNECTION WIRE(28)
and
PULSE CONNECTION WIRES(29)
into
the
METER(25),
and push the excess wires back into the
UPRIGHT(4).
Attach the
METER(25)
to the plate
on the
UPRIGHT(4)
with
ROUND HEAD SCREWS(M5x0.8x10mm)(94).
NOTE:
Be careful not to damage the wires when attaching the
METER(25)
to the
UPRIGHT(4).
C.
D.
L
R
Содержание A550-110A
Страница 24: ...PRODUCT PARTS DRAWING 24 FRONT BACK...
Страница 28: ...NOTES 28...
Страница 29: ...NOTES 29...
