Stamina 55-6100U, Руководство пользователя

Страница: 6 / 19

ASSEMBLY INSTRUCTIONS
6
BACK
FRONT
L
R
Make the SNAP PIN(95)
face down.
NOTE:
„ „
„ „ „
STEP 1:
Set the BENCH BASE(32) on the floor as shown in the illustration above. Attach the two
BENCH LEGS(33) to the BENCH FRAME(31) and the BENCH BASE(32) with HEX BOLTS(M8 x 45mm)(84)
and NYLOCK NUTS(M8)(90).
„ „
„ „ „
STEP 2:
Attach the BENCH LEG/w HOLE(34) and EYEBOLT(39) to the BENCH FRAME(31) with
HEX BOLT(M8 x 50mm)(85), WASHER(M8)(93), and NYLOCK NUT(M8)(90). Store the EYEBOLT(39) by
Inserting the EYEBOLT(39) into the hole on the BENCH LEG/w HOLE(34) and secure with the SMALL
KNOB(40). Refer to the inset drawing.
„ „
„ „ „
STEP 3:
Make the SNAP PIN(95) on the SUPPORT TUBE(35) face down. Then attach the SUPPORT
TUBE(35) and LOCKING PIN(37) to the BENCH FRAME(31) with HEX BOLT(M8 x 50mm)(85),
WASHER(M8)(93), and NYLOCK NUT(M8)(90). Attach the INNER SUPPORT TUBE(36) to the BENCH
BASE(32) with HEX BOLT(M8 x 45mm)(84) and NYLOCK NUT(M8)(90).
NOTE: If the SUPPORT TUBE(35) and the INNER SUPPORT TUBE(36) are locked together by the SNAP
PIN(95) during assembly, press the SNAP PIN(95) down to release the tubes.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Make sure you have all of the parts required for the machine. (Refer to the
assembly drawing). Read each step carefully before beginning. If you are missing a part please call our
customer care line for assistance on
+44 (0)1242 702345.
„ „
„ „
„
STEP 2
There is a "L" decal on the BENCH LEG(33), and a "R" decal on the SUPPORT TUBE(35) and
INNER SUPPORT TUBE(36) assembly to help you identify their positions on the frame.
„ „
„ „
„
STEP 1, 2 & 3