background image

STORAGE

11

1.

2.

STORING THE TRANSFORMER

TM 

1000

The 

TRANSFORMER

TM 

1000 

can be folded as illustrated for easy

storage.  Please follow the following process:

Adjust the 

SUPPORT ARMS(47,  48)

 and 

ROTATING

ARMS(102)

 to the position shown in illustration 1.  Remove

the 

EYEBOLT(39)

 from the 

BENCH LEG/w HOLE(34).

Remove the 

LOCKING PIN(37)

 from the 

SUPPORT TUBE(35)

on the Bench.  Press down the 

SNAP PIN(95)

  on the

SUPPORT TUBE(35)

 and fold the bench down.  Lock it in

position by inserting the 

LOCKING PIN(37)

 into the hole in the

SUPPORT TUBE(35).  

Turn the 

PULLEY FRAMES   (15)

 to

face to the inside of the 

UPRIGHT FRAME(1).

Loosen the 

SECURING KNOB(41).

  Fold the Bench up to the

Upright Frame and lock it in position with the 

EYEBOLT (39)

and 

SMALL KNOB(40)

 as shown in illustration 3.  The

EYEBOLT(39)

 must be attached to the Upright Frame as

shown.  Hook the two 

HAND STRAPS(21)

 onto the tubes on

the 

BENCH FRAME(31)

 for more security.

1.

2.

3.

WARNING:

When folding or unfolding the 

TRANSFORMER

TM 

1000,

 keep all children away from the 

TRANSFORMER

TM

1000

 and make sure your hands are clear of any folding or pinch point.

Always make sure that the 

LOCKING PIN(37)

 and 

EYEBOLT(39)

 are properly installed.

Before folding the bench down, make sure that all three wheels are up in the non-rolling position.

1.

2.
3.

3.

Содержание 55-6100U




















Отзывы: