Stamina 55-2065, Руководство пользователя

Страница: 7 / 30

ASSEMBLY INSTRUCTIONS
Remove
HEX HEAD BOLTS(M8 x 16mm)(74)
and
LOCK WASHERS(M8)(88)
from the
RIGHT
PIVOT(45).
Keep the
PEDAL RAIL CONNECTOR(43)
on the
RIGHT PIVOT(45).
Then insert the
right
PEDAL RAIL ASSEMBLY
onto the
RIGHT PIVOT(45)
and secure with
HEX HEAD BOLTS
(M8 x 16mm)(74)
and
LOCK WASHERS(M8)(88).
Do not tighten the bolts. Insert the bolt on the
PEDAL SLIDER(51)
into the hole on the
RIGHT PEDAL ARM CONNECTOR(56)
and secure with
NYLOCK NUT(M10)(86)
and
WASHER(M10)(90).
Tighten
BOLTS(M8 x 16mm)(74).
Repeat on
the left side.
L
R
7
STEP 3
NOTE:
There is a
"L"
decal on the
LEFT PEDAL SUPPORT(49)
attached to the left
PEDAL RAIL
ASSEMBLY.
Attach the left
PEDAL RAIL ASSEMBLY
to the left side of the Elliptical unit. There is a
"R"
decal on the
RIGHT PEDAL SUPPORT(50)
attached to the right
PEDAL RAIL ASSEMBLY.
Attach the right
PEDAL RAIL ASSEMBLY
to the right side of the Elliptical unit.
The lip on the
PEDAL CAPS(46)
must face inside. The sides without a lip face outside as
shown.
STEP 4:
Attach the
PEDAL CAPS(46)
onto the
LEFT
and
RIGHT PEDAL SUPPORTS(49, 50)
with
ROUND HEAD BOLTS(M6 x 25mm)(65).
Slide the
PEDAL DIVIDERS(47)
into one of the four slots
on the
PEDAL CAPS(46)
to fit your shoes. You may select the front or the back of the
PEDAL CAPS(46)
for foot placement. You will have more vertical movement in the Elliptical stride if you place your feet at the
back of the
PEDAL CAPS(46).
CAUTION: