SET UP INSTRUCTIONS
12
Place the
1771 Cross Trainer
in the area where it will be used. It is recommended that the
1771 Cross
Trainer
be placed on an equipment mat. The maximum operation dimensions of the
1770 Cross Trainer
are approximately 56 1/8" long x 60 5/8" tall x 26 1/8" wide. (These dimensions may vary up to one inch.) An
area 4 feet wide x 7 feet long is required for safe operation of the
1771 Cross Trainer.
Make sure that
adequate space is available for access to and passage around the
1771 Cross Trainer.
Adjust the
LEVELING CAPS(54)
on the
REAR STABILIZER(3)
so that the
1771 Cross Trainer
sets on the floor without rocking.
The
1771 Cross Trainer
has a pair of
WHEELS(55)
on the
FRONT STABILIZER(2).
Grasp
the
STATIONARY HANDLEBAR
and tip the
1771 Cross Trainer
forward to move.
LEVELING:
MOVING:
FUNCTION INSPECTION:
Visually inspect the
1771 Cross Trainer
to verify that assembly is as shown in the above illustration. Check
the function of the
1771 Cross Trainer.
Stand on the foot pedals and place your hands at a comfortable
position on the handlebars. Slowly move your highest foot forward and follow the natural path of the machine.
Turn the crank slowly through one complete revolution to verify that the drive train functions properly. Adjust
the
TENSION KNOB(23)
and verify that it functions properly.
CAUTION:
Locate and read the
WARNING LABEL(93)
on the
1771 Cross Trainer.
Make sure that all
users read the
WARNING LABEL(93).
Equipment Mat
Stationary Handlebar
Содержание 55-1771
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Страница 21: ...21 NOTES...
