Stamina 55-1527C, Руководство пользователя

Страница: 9 / 18

ASSEMBLY INSTRUCTIONS
9
1.
2.
BUCKLE
STEP 8
Install the
HEIGHT ADJUSTMENT BEAM(6)
into
MAIN FRAME(4)
by pulling the
LARGE SPRING
PIN(16)
on the
MAIN FRAME(4)
and inserting the
HEIGHT ADJUSTMENT BEAM(6)
as shown. For
added safety, thread the
LOCKING KNOB(17)
into back side of the
MAIN FRAME(4).
WARNING:
Do not use the until you have verified your height setting. Failure to use
the proper height setting can result in difficulty recovering from the decline position. See
HEIGHT ADJUSTMENT
instructions on page 10.
STEP 9
Attach the
NYLON STRAP(25)
onto the
BUCKLE
on the end of the
BUCKLE STRAP(26)
by inserting
the end of the strap up through the bottom of the buckle, as shown in the illustration 1.
STEP 10
Hook the end of the
NYLON STRAP(25)
onto the loop on the back of the
MAIN FRAME(4).
Hook the
end of the
BUCKLE STRAP(26)
onto the loop on the
FRONT FRAME(1).
NOTE: The
NYLON STRAPS
are used to control the decline angle of the
.
For
a steeper decline angle, lengthen the straps. For a lessor decline angle, shorten the straps.
Make sure these
NYLON STRAPS
are tight in the buckle and check the decline angle
before using the .
A.
C.
B.
BUCKLE