Stamina 55-1527C, Руководство пользователя

Страница: 6 / 18

ASSEMBLY INSTRUCTIONS
STEP 1
Unfold the
BASE ASSEMBLY
to an upright position by moving the
FRONT FRAME(1)
away from
REAR
FRAME(2).
Then push down on the middle of the two
FOLDING LINKAGES(3)
until they are fully
locked down.
STEP 2
Slide one
PROTECTIVE COVER(21)
onto each side of the
BASE ASSEMBLY,
and pull the covers
down until the bottom of the covers are slightly lower than the
FOLDING LINKAGES(3).
Secure the
PROTECTIVE COVERS(21)
to the
FOLDING LINKAGES(3)
with the
SECURING STRAPS
on the
bottom of the covers.
NOTE:
6
When the
PROTECTIVE COVERS(21)
are assembled correctly, the
FOLDING LINKAGES(3)
should not be visible, and the INVERSION TABLE LOGO should be on the outside. Refer to the
illustration.
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance
1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com