Stamina 50-0170, Руководство пользователя

Страница: 10 / 30

ASSEMBLY INSTRUCTIONS
STEP 10
Attach the
HANDRAIL(20)
to the
FRONT SUPPORT(6)
with
BUTTON HEAD BOLTS(M8x1.25x15mm)
(55)
and
WASHERS(M8)(69).
STEP 11
NOTE: Do not over tighten
BOLTS(56, 59)
as
PULLEYS(23)
must rotate freely after
BOLTS(56, 59)
are
tightened.
Run the Eyelet End of the
LAT BAR CABLE(25), 2050mm (80.7”) long, through the slot at the top end
of the
TOP BEAM(5).
Attach the BALL END of the
LAT BAR CABLE(25)
to the
TOP BEAM(5)
with a
PULLEY(23),
a
BUTTON HEAD BOLT(M8x1.25x115mm)(59),
a
NYLOCK NUT(M8x1.25)(67),
two
WASHERS(M8)(69),
and two
PULLEY SPACERS(24).
Attach the
LAT BAR CABLE(25)
to the bracket
on the
TOP BEAM(5)
with a
PULLEY(23),
a
BUTTON HEAD BOLT BOLT(M8x1.25x45mm)(56),
a
NYLOCK NUT(M8x1.25)(67),
two
WASHERS(M8)(69),
and the
WIDE CABLE GUIDE(26).
10
Eyelet End