8
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the
FRONT STAND(3)
to the
RAIL(1)
with
HEX BOLTS(M8x1.25x15mm)(76).
STEP 2:
There is an
“R”
decal on the
RIGHT PEDAL CAP(52R),
and an
“L”
decal on the
LEFT PEDAL
CAP(52L).
Insert the
PEDAL SHAFT(97)
and
SHORT PEDAL SHAFT(98)
into the
FRONT STAND(3).
Slide
the
PEDAL SPACERS(88)
onto right side of the
PEDAL SHAFT(97)
and
SHORT PEDAL SHAFT(98).
Slide
the
RIGHT PEDAL CAP(52R)
onto right side of the
PEDAL SHAFT(97)
and
SHORT PEDAL SHAFT(98)
and secure with
BUTTON HEAD BOLTS(M8x1.25x20mm)(73)
and
WASHERS(
M8xø22x2mm thick)(85).
Push the
RIGHT PEDAL CAP(52R)
toward the
FRONT STAND(3).
Slide the
PEDAL SPACERS(88)
and
LEFT PEDAL CAP(52L)
onto left side of the
PEDAL SHAFT(97)
and
SHORT PEDAL SHAFT(98),
then
secure with
BUTTON HEAD BOLTS(M8x1.25x20mm)(73)
and
WASHERS(
M8xø22x2mm thick)(85).
NOTE:
You need to use two wrenches to tighten the
BUTTON HEAD BOLTS(M8x1.25x20mm)(73)
at both
ends of the
PEDAL SHAFT(97)
and
SHORT PEDAL SHAFT(98)
at the same time.
(
black color
)
(
zincing
)
L
R
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at [email protected], or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are fit tested at the factory to ensure proper fit and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
Содержание 35-1413A
Страница 16: ...PRODUCT PARTS DRAWING FRONT BACK 16...
Страница 20: ...NOTES 20...
Страница 21: ...NOTES 21...
