ASSEMBLY INSTRUCTIONS
9
STEP 4
NOTE:
The
RIGHT PEDAL(20)
has an
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(20)
has right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(19)
has an
L
stamped on the end of the pedal shaft. The
LEFT PEDAL(19)
has left hand threads and is tightened
by turning counterclockwise.
Thread the
RIGHT PEDAL(20)
to the
RIGHT CRANK(37)
as shown. Tighten the pedal securely. The
shoulder of the
PEDALS(19, 20)
should be in contact with the
CRANKS(36, 37)
when securely tightened.
Select the
RIGHT PEDAL STRAP(22)
which has an
R
marked on the bottom side of the strap. Snap the
three hole end to the inside edge of the
RIGHT PEDAL(20).
Snap the other end to the outside edge of the
RIGHT PEDAL(20)
with the
R
mark on the bottom of the
RIGHT PEDAL STRAP(22).
Select adjustment
holes which allow your foot to be easily removed from the pedals.
Repeat on the left side in order to attach the
LEFT PEDAL(19)
to the
LEFT CRANK(36)
and snap the
LEFT
PEDAL STRAP(21)
to the
LEFT PEDAL(19).
STEP 5
Attach the
SEAT(17)
to the
SEAT POST(4)
with
BUTTON HEAD BOLTS(M8x1.25x20mm)(55)
and
WASHERS(M8)(68).
Insert the
SEAT POST(4)
into the
MAIN FRAME(1)
and secure with the
ADJUSTMENT
KNOB(54).
NOTE:
Make sure that the pin on the
ADJUSTMENT KNOB(54)
is inserted into one of the holes in the
SEAT POST(4).
The
ADJUSTMENT KNOB(54)
should be screwed in tight to make the
SEAT
POST(4)
fit securely in the
MAIN FRAME(1).
Shoulder
Shoulder
Содержание 15-0182
Страница 2: ......
Страница 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Страница 21: ...NOTES 21...
