ASSEMBLY INSTRUCTIONS
STEP 3
NOTE:
The
RIGHT PEDAL SHAFT(37)
has an
R
stamped on the end of the pedal shaft. The
RIGHT
PEDAL SHAFT(37)
has right hand threads and is tightened by turning clockwise. The
LEFT
PEDAL SHAFT(41)
has an
L
stamped on the end of the pedal shaft. The
LEFT PEDAL SHAFT
(41)
has left hand threads and is tightened by turning counterclockwise.
Thread the
RIGHT PEDAL SHAFT(37)
to the
RIGHT CRANK(26)
as shown. Tighten the pedal securely.
The shoulder of the
PEDAL SHAFTS(37, 41)
should be in contact with the
CRANKS(25, 26)
when
securely tightened. Snap a
PEDAL STRAP(39)
onto the
PEDAL(38).
There are two adjustment holes
on each side of the
PEDAL STRAP(39).
Select the adjustment holes which allow your feet to be easily
removed from the pedals.
Use the same procedure to attach the
LEFT PEDAL SHAFT
(41)
to the
LEFT CRANK(25)
and to attach
other
PEDAL STRAP(39)
to the
PEDAL(38).
STEP 4
NOTE:
Refer to the detail view below. Be careful not to damage the
SENSOR WIRE(45)
on the
METER(31)
when disassembling or installing the
METER(31).
By hand or by using a simple tool remove the
METER(31)
from the
METER HOUSING(23).
Install a
AAA battery into the
METER(31),
the battery is not included. See page 9 for detailed battery installation
instructions. Press the
METER(31)
back into the
METER HOUSING(23).
8
Shoulder
Shoulder
Содержание 15-0141
Страница 3: ......
Страница 14: ...PRODUCT PARTS DRAWING BACK FRONT 14 ...
Страница 17: ...NOTES 17 ...
