ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the
REAR STABILIZER(8)
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M8x1.25x90mm)(46)
and
NYLOCK NUTS(M8x1.25)(36).
STEP 2
Please verify the two
SPACERS(3)
have already been assembled onto each side of the
SHAFT
which on
the front of the
MAIN FRAME(1)
at the factory. Place a
PEDAL CAP(4)
onto each end of the
SHAFT
and
secure with
WASHERS(ø8xø23x2mm thick)(33)
and
NYLOCK NUTS(M8x1.25)(36).
Shaft
Содержание 1333 Precision Power
Страница 16: ...PRODUCT PARTS DRAWING FRONT BACK 16...
