Stallion SLC938, Руководство пользователя, Страница: 39 / 142

CRUISE CONTROL (cont).
Increasing Set Speed
The vehicle cruise speed setting can be
increased by one of the following methods:
1. Accelerate using the throttle pedal until the
desired speed is attained. Depress and
release the SET switch to lock in the new
setting; OR
2. Depress and hold the RESUME / ACCEL
switch until the vehicle attains the desired
speed. When the RESUME switch is
released, the new speed setting is stored
in the cruise control memory. The
RESUME switch does not function at
speeds below 20 MPH (32 kmh).
When driving with cruise control ON, each time
the RESUME switch is depressed, the set
speed increases by 1 MPH (1.6 kmh).
Note: When driving with the cruise control
engaged, the vehicle may be accelerated
normally by pressing the accelerator pedal in a
normal manner. Once the pedal is released,
the speed will revert to the previously set
(programmed) cruising speed.
WARNING:
NEVER engage the cruise control under the
following circumstances:
•
While driving in heavy traffic or stop-and-
go conditions
•
When driving in inclement weather, such
as snow or rain
•
If driving the vehicle on a long downhill
slope.
Decreasing Set Speed
The vehicle cruise speed setting can be
decreased by one of the following methods:
1. Depress and hold the SET switch until the
vehicle attains the desired speed. When
the SET switch is released, the new speed
setting is stored in the cruise control
memory.
2. Depressing the SET switch momentarily.
When released, the preset cruise speed
will return to its former level.
3. Slightly apply the service brake. After the
brake is released, the preset cruise speed
will be re-attained.
4. Depress and release the DECEL switch.
Upon release, the vehicle speed will be
reduced by 1 MPH (1.6 kmh). Each
subsequent press and release of the
DECEL switch will diminish speed by this
amount.
After disengaging the cruise control, you can
return to the preset speed by pressing, then
releasing, the RESUME switch, as long as
your speed is above 20 MPH (32 kmh).
Note: Once the cruise control switch is set to
OFF, the system memory is erased and the
cruise control function is disengaged. To re-
engage, follow the steps outlined previously in
“Increasing Set Speed”.