Stallion SLC938, Руководство пользователя, Страница: 20 / 142

ENTRY DOOR
(Continued)
Door Remote
The door remote control unit has two functions – CLOSE and OPEN.
To access the function buttons, slide the protective cover downward to expose the two buttons. Press the
right (UNLOCK) button once to open the door.
To close the door, press the left (LOCK) button once.
Each time either button is pressed, the red LED at the top of the remote will light. Should the lamp fail to
illuminate when the buttons are pressed, the battery will need to be replaced. The door can only be
locked or unlocked manually with the key .
To replace the remote battery, carefully pry open the side of the remote case. The battery (#2032) is
located in the front (button side) of the case interior. Remove the old battery and fit the replacement cell
into the battery cavity with the positive (+) side of the battery facing downward. Press the case halves
back together and press a button to check function.
EMERGENCY DOOR RELEASE
In an emergency, the door may be released from the interior of the vehicle by turning the red emergency
air release knob clockwise (rigthwise). The air release valve is located above the first step on the curbside
of the bus.
Note: An other manual door release valve is located underneath the vehicle next to the step.