screen of the camera, TV monitor or Image viewer with TV-in connector.
c) Press LEFT to start playing the video when viewing
d) Press LEFT again to stop playing the video.
e) Press UP to view the previous picture (or video) and DOWN for the next.
f) Press DOWN the select switch to return to THE info display.
When viewing images, the total number of all images in the SD-card and the index
of the displaying image will be shown respectively.
4.2.2 Delete Photo or Video
The operations are as following:
a) Press Right to display Photos and Videos.
b) Press Menu to select delete.
c) Press RIGHT to select delete current or delete all.
d) Press OK, Cancel and OK are prompted.
e) Press OK to delete the image or video.
Press CANCEL to cancel, then press MENU and press down the select switch to
return to the info display.
Please note that after deleting a picture or a video file, the deleted files can’t be
restored. Furthermore, in order to delete all the images and video clips in the SD-card, it
is suggested to format the SD-card
4.3 Laser Pointer
The laser beam can be turned on and is especially useful when it is dark, as an
additional function for pointing to an object or certain region of interested (ROI).
Press
﹡
to turn on the laser beam in TEST mode and use the tilt adjuster on the
back of camera to adjust the angle of the capturing direction.
NOTE: Please note that the laser could be harmful to your eyes, so do not look or
point directly into the eyes.
4.4 File Numbering
Images and videos are separately saved in the pre-named folder (104MEDIA). File
numbering continues by adding one to the last number for each new image or video.
The saving name is like PTDC0001.JPB or PTDC0001.AVI.Through the suffix you can
distinguish whether the file is an image (with suffix.jpg) or a video (with suffix.avi).
4.5 Firmware Upgrade
This camera is equipped with an automatic upgrade function for you. Upgrading is
needed only when an improved firmware is available. The operations are as following:
1. Unzip the update file
2. Copy the FW18NA.bin to SD card.
3. Insert the SD card into the camera.
4. Power on the camera from OFF position to Test Mode.
5. The camera will read the SD card and update itself automatically. When updating
the camera, the screen is black. (only for a few seconds)
6. The screen will turn on after it has finished.
7. Take out the SD card, then insert it into your computer, delete the FW18NA.bin
on the SD card. (If you don't do this, the camera will enter update mode again when
powered up).
8. Insert the SD card back into the camera for it to operate again.
All manuals and user guides at all-guides.com