4.1.14 Set Video Sound
The following shows how to turn off the sound of the video:
a) Press MENU to display the settings menu.
b) Press DOWN to select voice.
c) Press RIGHT to display the VOICE setting Interface.
4.1.15 Set Delay
This parameter means that how long the PIR (Passive Infrared motion sensor) will
be disabled after each trigger in “ON” mode. During this time the PIR of the device will
not react to the motion of animal (or human). The minimum interval is 5 seconds, it
means the PIR works all the time and media is taken almost continuously. The maximum
interval is 30 minutes, it means the PIR will be disabled for 30 minutes after each
triggering. The default value is 5 seconds.
The following shows how to set PIR Triggering Interval Time as 1 minute provided
that previous option is 5 seconds.
a) Press MENU to display the settings menu.
b) Press DOWN to select delay.
c) Press RIGHT to enter in to the interval setting.
d) Press DOWN to select 1 minute.
e) Press DOWN the select switch to save the current settings, then press MENU to
return to the info display.
Press MENU to cancel settings and return to the info display.
4.1.16 Set Timer
This parameter defines a certain time lapse in a day when STALKER X-S01
Professional trail camera can be triggered. In the rest of the time the device is shut off.
The effective value of the hour ranges from 0 to 23 while the minute ranges from 0 to
59.
Provided that the camera should work from eight a.m. to five p.m., the steps are as
follows:
a) Press MENU to display the settings menu.
b) Press DOWN to select timer.
c) Press RIGHT to select item, press UP or DOWN to change the value until the start
time changes to 8 and the stop time changes to 17.
d) Press DOWN the select switch to save all current settings, then press MENU to
return to the info display.
Press MENU to return to previous menu.
4.1.17 Enter Password
If the password setting is selected as ON, after switching on the camera, the LCD
screen on camera will prompt to enter password. The default password is OFF. It can be
changed where the steps are as follows:
a) Press MENU to display the settings menu.
b) Press DOWN to select Password.
c) Press Up to select ON, then press Right to select 4 numbers as a password.
d) Press OK to save the current settings, then press MENU to return to the info
display.
f) The LCD screen will prompt to enter your password next time you switch ON the
camera.
Press MENU to cancel settings and return to the previous menu.
4.2 Playback
In playback mode, images or videos can be viewed or deleted. The images and
videos can be viewed on: LCD screen of the camera or a TV monitor which connects to
the camera with a TV cable. For simplicity, operations with a PC won’t be introduced
here.
4.2.1 Viewing Photo or Video
a) Switch to TEST mode and enter into the info display.
b) Press RIGHT the select switch to view the latest picture (or video) on the LCD
All manuals and user guides at all-guides.com