7
CUTTING
Close switch, letting the head down slowly onto the work, Do not drop or
force. Let the weight of the saw head provide the cutting force. The saw
automatically shuts off at end of the cut.
Method of adjusting blade:
A. Loosen the screw #11.
B. Adjust the blade adjustable seat #64 to make the blade vertical to bed.
C. Place the square on the bed to check if the blade is vertical, if not,
repeat the process A to C.
D. Tighten the screw #11.
Figure (4)
Adjusting the blade
LUBRICATION
Lubricate the following components using lubricant, L-HV32
1. Ball bearing
–none.
2. Blade guide bearing-none
3. Driven wheel bearing-none.
4. Vise lead screw- as needed.
5. The driven gears run in the bath and will not require a lubricant change
more than then once a year. When needing a change, first put down
the bead to a Horizontal position, then loosen 4 screw (#75) of the gear
box open the cover (#93). Placing a pan under the tight lower corner of
the gear box, slowly raise the head until the oil flows out, Lower corner
of the gear box, slowly raise the head until the oil flows out, Lower head.
Then wipe up excess oil and foreign matter with soft rags. Then add
lubricant into the box until it is full and not flow over. Close the cover,
tighten 4 screws.
Содержание BS-115
Страница 1: ...Horizontal and Vertical Metal Cutting Band Saw MODEL BS 115 ...
Страница 15: ...15 Part Assembly Drawing ...