22
3. Changing the tool
WARNING:
Before any work on the
power tool (e.g.,maintenance,tool
change, etc.) as well as during transport
and storage,set the rotational direction
s w i t c h t o t h e c e n t e r p o s i t i o n .
Unintentional actuation of the on/off
switch can lead to injuries. Hold the
keyless chuck 3 rmly; turn it anti-
clockwise, until the drilling bit can be
inserted. Hold the keyless chuck 3 rmly;
turn it clockwise to lock the bit in position.
PL
EN
ORIGINAL INSTR
UCTION
4. Inserting the battery
WARNING:
Use only LI1215B lithium-ion batteries with the voltage listed on the
nameplate of your power tool. Using other batteries can lead to injuries and pose a re
hazard.
NOTE:
Use of batteries not suitable for the
machine can lead to malfunctions of or
cause damage to the power tool. Set the
rotational direction switch 5 to the center
position in order to avoid unintentional
starting. Align the raised rib on the battery
pack with the grooves of the drill, and then
attach the battery pack to the drill,until you
hear “click” to indicate the battery pack is
attached tightenly.
5. Direction of rotation
The direction-of rotation switch 5 is used to reverse the rotational direction of machine.
However, this is not available when the on/off switch 1 actuated.
Right rotation:
for drilling and driving in
screws,push the direction-of-rotation
switch 5 left to the stop.
Left rotation:
for loosening and unscrewing
screws and nuts,press the direction-of
rotation switch 5 throuth to the right stop.
przełącznik kierunku
obrotów
