Stairville LED Flood TRI Panel 7x3W RGB, Руководство пользователя

Страница: 27 / 48

Press [Mode] repeatedly until the display shows ‘d.xxx’ . Now you can set the number of the
first DMX channel to be used by the device (DMX address). Use the [Up] and [Down] buttons to
select a value between 1 and 510 (display shows ‘d.001’ … ‘d.510’ ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
3-channel 510
4-channel 509
8-channel 505
Confirm with [Setup] . Now use the [Up] and [Down] buttons to select one of the following DMX
operating modes:
n ‘3-ch’ (three channels)
n
‘4-ch’ (four channels)
n
‘8-ch’ (eight channels)
This setting is only relevant when the device is controlled via DMX. When the display shows
the desired value, press [Setup] to confirm the selection and then [Mode] to return to the
parent menu. To return to the parent menu without making changes, press [Mode] .
DMX mode
Operating
LED Flood TRI Panel 7x3W RGB
27
LED Floodlight