Stairville LED Flood TRI Panel 7x3W RGB, Руководство пользователя

Страница: 31 / 48

For programmes ‘Pr.02’ to ‘Pr.01’ , you can additionally set the speed for the transition from
one hue to the next. Use the [Up] and [Down] buttons to select a value between ‘slow’ and
‘fast’ (display shows ‘SP.01’ … ‘SP.99’ ).
Confirm again with [Setup] . In the following menu, you can use [Up] and [Down] buttons to set
the strobe speed for the various hues in a range from ‘FS00’ to ‘FS99’ .
Press [Mode] repeatedly until the display shows ‘SLAv’ . Confirm with [Setup] .
This setting is only relevant if the device is operating as Slave controlled by a Master, but not
via DMX. When the display shows the desired value, press [Setup] to confirm the selection and
then [Mode] to return to the parent menu. To return to the parent menu without making
changes, press [Mode] .
The sound controlled automatic show can only be activated when the unit is operating in
stand alone mode or as master in a master / slave combination. This setting is only relevant if
the device is not controlled via DMX.
Press
[Mode] repeatedly until the display shows ‘SU xx’ . This activates the sound controlled
automatic show.
Press
[Setup] and use [Up] and [Down] to adjust the sensitivity for the sound control in a range
from ‘SU.00’ to ‘SU.31’ .
Settings programme
Pr.02 … Pr.10
Operating mode ‘Slave’
Sound control
Operating
LED Flood TRI Panel 7x3W RGB
31
LED Floodlight