Stairville DMX Foot 2, Руководство пользователя

Страница: 31 / 44

7.3.4 Hold time
To set the hold time of the footswitches [Pedal 1] and [Pedal 2] , proceed as follows:
1.
Press [Up] or [Down] repeatedly, until the display shows ‘Pedal1 Setup’ or ‘Pedal2 Setup’
and confirm with [Enter] .
2.
Use [Up] or [Down] to select the menu item ‘PEDAL1 HodTime’ or ‘PEDAL2 HodTime’ and
confirm with [Enter] .
3.
Use [Up] or [Down] to select a value between ‘01S’ and ‘90S’ . Press [Menu] to accept the
selection and exit the open menu.
ð
The selected hold time is now set for the selected footswitch [Pedal 1] or [Pedal 2] .
4.
Use [Up] or [Down] to select the menu item ‘ON’ in order to permanently activate the
hold time. Press [Menu] to accept the selection and exit the open menu.
ð
The hold time is now permanently activated for the selected footswitch [Pedal 1] or
[Pedal 2] , until the footswitch is pressed again.
5.
Repeat steps 1 to 4 to set the hold time for the second footswitch.
Setting hold time
Operating
DMX Foot 2
31