Stairville DMX Foot 2, Руководство пользователя

Страница: 18 / 44

Every DMX device operates with a certain vendor specific number of channels through which
the incoming control signals are converted into movements, brightness or colour changes,
etc.. Since all receivers in a DMX chain always receive all signals, a starting address must be
assigned to each DMX device. Starting from this address (a value between 1 and 512), the
incoming signals are then interpreted by the receiver and implemented in accordance with
the function mode set on the receiver (device-internal channel assignment).
Within a DMX chain, one start address can easily be assigned multiply. The corresponding
receivers then operate synchronously (same movements, same brightness, same colour, etc.).
Signal conversion
Starting up
DMX controller
18