Stairville DMX Foot 2, Руководство пользователя

Страница: 28 / 44

7.3.2 Footswitch response
To assign the response of the footswitches [Pedal 1] and [Pedal 2] , proceed as follows:
1.
Press [Up] or [Down] repeatedly, until the display shows ‘Pedal1 Setup’ or ‘Pedal2 Setup’
and confirm with [Enter] .
2.
Press [Up] or [Down] repeatedly, until the display shows ‘PEDAL1 Mode’ or ‘PEDAL2
Mode’ and confirm with [Enter] .
3.
Use [Up] or [Down] to choose between ‘Toggle’ and ‘Flash’ . Press [Menu] to accept the
selection and exit the open menu.
Menu Response
‘Toggle’ Switch: Press the footswitch to play the preset. Press the
footswitch again to stop the preset.
‘Flash’ Pushbutton: Hold down the footswitch to play the preset.
Release the footswitch to stop the preset.
ð
The selected response is now assigned to the selected footswitch [Pedal 1] or
[Pedal 2] .
4.
Repeat steps 1 to 3 to assign the response to the second footswitch.
Operating
DMX controller
28