Assembly
Step 7: Install Console
Parts
s #OMPLETEDASSEMBLYFROM3TEP
s 2EF#ONSOLE1TY
Hardware
s 2EFX0HILLIPS(EAD3CREW1TY
Tools
s 0HILLIPS(EAD3CREWDRIVER
7-1
Connect the cables from the Mast to the 20 pin
connector on the PC board (Figure 7A & 7B).
7-2
Connect the telemetry Heart Rate (Polar HR) cable to
the J6 connector at the top of the PC board (Figure
7A &
7B).
7-3
Align the console to the plate at the top of the Mast
and secure with 4 Phillips Head Screws.
NOTE:
Make sure the cables are not crimped or pinched
while attaching the Console to the Mast.
Figure 7A
Figure
7
B
Figure
7
C
20 Pin Connector
J6 Polar HR
Assembly Manual
13
