Step 8: Install Cup Holder
Parts
s #OMPLETEDASSEMBLYFROM3TEP
s 2EF#UP(OLDER1TY
Hardware
s 2EFX"UTTON(EAD3CREW1TY
8-1
Attach the Cup Holder to the Mast with 3 Button
Head Screws (Figure 8).
Step 9: Remove Transport Wheels
Parts
s #OMPLETEDASSEMBLYFROM3TEP
s 2EF0OWER3UPPLY1TY
Use a second person when performing assembly
steps requiring heavy lifting or awkward
movements.
9-1
Roll the StepMill
®
machine to the workout location.
9-2
With the assistance of another person, tilt the
StepMill
®
machine to one side and remove the Cotter
Pin, the Clevis pin and the Wheel (Figure
9). Repeat
for the opposite side.
NOTE:
Retain the Cotter pins, Clevis pins and Wheels for
moving the machine in the future.
9-3
Adjust the Levelers as needed.
Figure 8
Assembly
Figure 9
Assembly Manual
14
