Stairmaster GAUNTLET Series 8, Руководство по обслуживанию

Страница: 41 / 54

Page 41
WIRING AND POWER FLOW
Power wiring from external power supply to LCB
The 8G uses a power brick to step down the wall voltage from 110/220 to 12V nominal. The 8G does not require a dedi-
cated or 20A circuit, although a grounded outlet is required.
Click on an icon to open the diagram in a new window. Click the button in the upper right to close the new view and
return to the service manual.
Note : these buttons will not work in a browser window.
Right click > Save As
or click the button in your browser to save this manual to
your PC.
Wiring Diagrams
8G Base Wiring
For additional information about the wiring, signal and power flow on the 8-Series OpenHub consoles, please refer to the
OpenHub Service Manual .