Stairmaster GAUNTLET Series 8, Руководство по обслуживанию

Страница: 22 / 54

Page 22
2. Secure the Frame Neck Adapter to the frame
using four (4) pieces each of the 5/16”x1 3/4”
screws, 21mm OD washers, and 5/16” nylok hex
nut.
3. Slide the Mast Grommet onto the mast first and
then the Upper Shroud Cover
Route the wires for the display up and out
through the top of the mast. Then use two (2)
pieces each of the 3/8”x3 5/8” screws, 3/8” nylok
hex nuts, and (4) pieces of Ø3/8” ID washer to
secure the Mast to the Frame Neck Adapter.
4. Install the upper handrail beauty ring onto the
top of the lower neck as shown. Connect the
heartrate grip wires on the left side handrails
prior to bolting.
Slide beauty ring onto both handrails of the Hot-
bar Handrail Assembly. Exert force on handrail
sufficient to insure a tight seal with the beauty
ring then use two (2) pieces each of 5/16”x3/4”
screws and Ø1.6 ID washers to secure the hand-
rails to the mast per side.