Page 13
HEART RATE MONITORING
HEART RATE INPUT
Contact heart rate and telemetry (e.g., Polar
®
) heart rate signal detection is
available. There is no default priority of heart rate input. If a telemetry signal
is detected first, contact heart rate signals are inhibited from being detected
throughout the rest of the workout session and vice-versa. There is also a
short “lock out” period at the beginning of each workout session during which
the console first detects a signal and then validates the signal type. The
duration of this shorter, initial “lock out” period differs between telemetry and
contact heart rate.
•
Telemetry heart rate - after the initial belt signal is detected, the
console will enter a validation phase in which four good heart
beat signals within four seconds are required before
locking on telemetry heart rate signals for the duration of the
workout session. During the validation phase the console will not
recognize contact heart rate signals.
•
Contact heart rate - after the initial contact sensor signal is
detected, the console will enter a validation phase requiring a
good heart beat signal within 10 to 15 seconds, or until the
system acquires a valid signal. During the validation phase, the
console will not recognize telemetry heart rate signals. The
console will display a beating double heart icon that has the
inner heart colored in while searching for a valid signal.
Locked/Non-locked Option
When the “not locked” option is selected the heart rate source signal is not
fixed during the exercise (if the signal is lost, either input will be valid). If the
“locked” option is selected, then the heart rate source signal is locked on the
first detected signal during the workout. To set a heart rate signal input, or to
turn off the heart rate option all together, perform the following steps:
1.
On the console keypad, press [LEVEL:
∧]
, [3], [2]. At this point the
screen will display “HR INPUTS.” Press [ENTER] to select this
option.
Содержание FREECLIMBER 4200 PT
