Stahl SolConeX 8570/ 1 Series, Руководство по эксплуатации, Страница: 31 / 32

Cleaning
14
150663 / 8570609300
2017-04-25·BA00·III·en·06
SolConeX Coupler Socket
Series 8570/16
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
10.4 Returning the device

Only return or package the devices after consulting R. STAHL!
Contact the responsible representative at R. STAHL for this.
R. STAHL's customer service is available to handle returns if repair or service is required.

Contact customer service personally.
or

Go to the www.stahl.com website.

Select "Downloads" > Customer service > "RMA Request".

Fill out the form.
Wait for confirmation. R. STAHL's customer service will contact you.
You will receive an RMA slip after speaking with customer service.

Send the device along with the RMA slip in the packaging to R. STAHL Schaltgeräte
GmbH (refer to Section 1.1 for the address).
11 Cleaning
• To avoid electrostatic charging, the devices located in potentially explosive areas may
only be cleaned using a damp cloth.
• When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
• Do not use aggressive detergents or solvents.
• Prevent water and cleaning agents from penetrating the socket contacts.
12 Disposal
• Observe national and local regulations and statutory regulation regarding disposal.
• Separate materials when sending it for recycling.
• Ensure environmentally friendly disposal of all components according to the statutory
regulations.
13 Accessories and Spare parts
Only return or package the devices after contacting and consulting R. STAHL!
NOTICE
Malfunction or damage to the device due to the use of non-original components.
Non-compliance can result in material damage.
• Use only original accessories and spare parts from R. STAHL Schaltgeräte GmbH.
For accessories and spare parts, see data sheet on our homepage
www.stahl-ex.com.