Stahl SolConeX 8570/ 1 Series, Руководство по эксплуатации, Страница: 30 / 32

150663 / 8570609300
2017-04-25·BA00·III·en·06
Maintenance and repair
13
SolConeX Coupler Socket
Series 8570/16
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
10 Maintenance and repair
10.1 Maintenance
• Consult the relevant national regulations to determine the type and extent
of inspections.
• Adapt inspection intervals according to the operating conditions.
During maintenance work on the device, check at least the following points:
• if the cables have been clamped properly,
• if the enclosure, seals and surfaces are damaged,
• sleeves for pollution,
• compliance with the permitted temperatures,
• whether the device is used in accordance with its intended use.
10.2 Maintenance
10.3 Repair
CAUTION
Danger of electric shock due to energised parts!
Non-compliance can result in minor injuries!
• All connections must be disconnected from the power supply.
• Secure the connections against unauthorized switching.
DANGER
Overheating and explosion hazard due to defective switching contacts!
Non-compliance results in severe or fatal injuries.
• Replace the entire socket flange after each short circuit in the main
circuit of the switch because the state of the switching contacts cannot
be checked in hermetically sealed equipment.
Observe the relevant national regulations in the country of use.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by R. STAHL
Schaltgeräte GmbH.